The Attero Tech Synapse D16Mio is a high-performance networked audio interface supporting Dante™ with AES67 interoperability. The D16Mio features 16 channels of studio grade microphone preamplifers, with up to 51 dB of digitally controlled gain in 3 dB steps. Each microphone input also supports +48 V switchable phantom power and a switchable pad for accommodation of professional line level inputs. The balanced line level outputs feature digitally controlled output attenuation from 0 to -100 dB.



Key Features

  • 16 studio-grade mic preamps with line level capability
  • Front panel or network control of mic preamp gain, phantom power, mic/line input sensitivity
  • 16 line level balanced outputs with front panel or network level control
  • Available Q-SYS control plugin– no programming required

Synapse D16Mio

  • Synapse D16Mio Specifications:

    Mic/Line Inputs (16 Channels)  
    Maximum input level -43 dBu (max mic gain)
    +24 dBu (pad active – line mode)
    Input type 3-pin depluggable terminal block
    Analog Outputs
    (16 Channels)
    Maximum output level +24 dBu
    Input type 3.8 mm terminal blocks
    Dynamic range >110 dB
    Headphone Output  
    Connector 1/4 in TRS jack
    Load 32 Ω minimum
    Audio Networking  
    Protocol support Dante™ with AES67 support
    Channel count 16 Dante RX, 16 Dante TX
    Ports 2 - Gb Copper on RJ-45, 2 - Gb SFP
    Sample rates 16/24-bit, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
    Dimensions (HWD) 1 RU form factor
    1.75 x 19 x 12.5 in
    (44.5 x 482.6 x 5080 mm)
    Weight 6 lb (2.72 kg)
Free shipping on ADJ orders over $1600.