top of page

Overview

 

Augmenting the already highly successful GB4 console range is the new GB8 8-bus console. The GB4 has found many friends including the Cavern Club in Liverpool and in use at the Bedford venue in South London.Available in frame sizes from 24 to 48 channels each with four full-function stereo channels and four stereo returns the GB8 is designed for installations such as churches and performance venues or for small touring sound systems. The dual-mode topology implemented to such success on the MH3 and MH4 desks allows the GB8 to be used on FOH or monitor duties with fader control of group or aux outputs. Additional features over the GB4 include a 1kHz oscillator and a meter bridge with three led meters that very closely emulate the ballistics of VU meters.Four mute groups allow several channels to be muted simultaneously while another unique facility is the limiter on both the Record and Alternate stereo outputs that makes it easier to create a stereo recording of the mix. The console also features an output matrix with eleven feeds to four outputs being fed from the group busses and main L R and C (mono) outputs. Although largely conventional in layout the GB8 does have some unique mechanical features. The rugged steel chassis has a sloping rear connector panel so that it is easier to configure from the front of the desk while the integral power supply has a link option for an external back-up PSU. Both the GB4 and GB8 desks carry the high quality hallmark with which Soundcraft is synonymous with engineering and design as you’d expect from this high-end manufacturer. Careful attention has been given to the mechanical construction to ensure reliability under strenuous conditions with all input modules being constructed with individual vertically-mounted pcb’s fitted to the steel chassis front panel with individually-nutted potentiometers. The GB Series also shares the stylish looks of the MH4 MH3 and LX7ii consoles continuing a strong family look and feel across the range.

Soundcraft GB8 24ch 24+4/8/2

$4,050.37 Regular Price
$4,049.00Sale Price
  • Total # Of Inputs 24 Total
    Mic/Line Inputs 24 Line: 1/4" TRS Phone
    24 Microphone: 3-pin XLR
    Stereo Line Inputs 4 Stereo: L/R Paired 1/4" Phone Line & 3-pin XLR Microphone
    In-Line Inputs/Returns No
    AUX Sends 8 Aux Sends
    AUX Returns 4 Stereo Returns
    Inserts 1/4" TRS Phone - Mono Inputs, Main Output and Subgroup Outputs
    BUS (Group) Outputs 8 Subgroups: Balanced 3-pin XLR
    2 Trk Master I/O Mix L/R: Stereo Paired 3-pin XLR Balanced
    ALT I/O ALT Stereo: L/R Stereo Paired 1/4" Output
    Monitor Outputs Monitor: L/R Stereo Paired 1/4" TRS Phone
    EQ Section High Filter: 13kHz, +/- 15dB, 2nd order shelving
    Hi-Mid: 550Hz - 13khz, +/- 15dB, Q=1.5
    Lo-Mid: 80Hz - 1.9kHz, +/- 15dB, Q=1.5
    Low Filter: 80Hz, +/- 15dB, 2nd order shelving
    Solo/Mute All Input Channels
    Channel Level Control 100mm Faders
    Trim/Gain Control Rotary Potentiometers
    Phantom Power +48V Phantom individually switched
    Metering Input Channels: Single tri-color 4-segment LED bargraph
    Outputs: 11 tri-color 12-segment LED bargraphs, + Meterpod with 3 VU meters (L/R/C)
    Frequency Response 20Hz to 20kHz <1dB
    Dynamic Range not specified by manufacturer
    Signal-to-Noise Ratio Measured RMS, 22Hz to 22kHz Bandwidth
    -128dBu Mic E.I.N. @ unity gain, 150 ohms souce impedance
    <-82dBu Mix Output, 40 inputs routed to mix
    <-83dBu Group & Center Outputs
    <-80dBu Aux Outputs
    <-89dBu Matrix Outputs
    Total Harmonic Distortion (THD) <0.006%Mic sens. -30dBu, +20dBu at all outputs @ 1kHz
    Power Supply Internal AC PSU - 85V, 270V AC, 50/60Hz universal input
    Power Consumption
    Less than 150W
    Dimensions 66.1 lbs. (30 kg)
    Weight 47.56 x 9.23 x 25.83" (1208 x 235 x 656mm) (WxHxD)
    Packaging Info
    Package Weight 73.65 lb
bottom of page