top of page

Overview

 

High Power 2-Way All Weather Loudspeaker with 1 x 15" LF & Rotatable Horn for Life Safety Applications

 

The AW595-LS-BK is a high power, lightweight, 2-way, full-range loudspeaker system comprised of the JBL Differential Drive dual voice coil and dual magnetic gap 2265H 380 mm (15 in) low-frequency driver and 2432H high-frequency 38 mm (1.5 in) exit, 75 mm (3 in) voice-coil compression driver. The large format Progressive Transition wave-guide provides excellent 90° x 50° coverage. The waveguide is rotatable so the loudspeaker system can used in either the vertical or horizontal orientation. The system is equipped with a 400 W 70/100V transformer.

JBL AW595-LS-BK 15" 2-Way All Weather Loudspeaker w/EN54-24 Certification, Black

$5,225.74Price
  • Frequency Range (-10dB) 41 Hz – 20 kHz
    Frequency Response (±3 dB) 88 Hz – 19 kHz
    Coverage Pattern 90° x 50°, rotatable waveguide
    Directivity Factor (Q) 12.6
    Directivity Index (DI) 11 dB
    Crossover Frequency 1.2 kHz
    System Power Rating 400 W (1600 W peak), 100 hrs
    Maximum SPL (1m) 127 dB-SPL cont avg (133 dB peak)
    Maximum SPL (@ 4m) 113.34 dB
    System Sensitivity (1w @ 1m) 100 dB SPL
    Sensitivity (1W @ 4m) 88.43 dB SPL
    Transformer Taps 70V: 400 W, 200 W, 100W100V: 400W, 200W
    LF Driver 1 x JBL 2265H 380 mm (15 in.) Differential Drive® driver with 75 mm (3 in) dual voice coil
    Nominal Impedance 8 ohms
    Sensitivity (1W @ 1m, within operational band) 98 dB SPL
    HF Driver JBL 2432H, 38 mm (1.5 in) exit compression driver, 75 mm (3 in) voice coil
    Sensitivity 113 dB SPL
    Waveguide PT-H95HF -1
    Enclosure Hand-Laminated Fiberglass, gray gelcoat (similar to Pantone 420C), available in black (-BK)
    Suspension Attachment 2 x M10 for Included U-Bracket, 2 x M6 for aiming stabilization, 1 x M10 on rear for safety.
    Grille Three layer grille assemblies consisting of 16-gauge powder coated stainless steel, backed with open cell foam and stainless steel mesh
    Input Connector CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs.
    Environmental IP55C per IEC 529
    Dimensions (H x W x D in horizontal cabinet orientation) 485 x 810 x 478 mm(19.1 x 31.9 x 18.8 in)
    Net Weight (each) 28.3 kg (62.5 lb)
    Crossover Modes Passive
bottom of page